Carrinho
 1 x  LX60861 - Plastic Tail Blade 86 mm - Orange
 1 x  PV0216 Socket Screw M3x25
 1 x  JRH61835 JR Battery Mount 450
 1 x  BLH2002 Main Blade Grips With Hardware 200 SR X
 1 x  BLH2017 Horizontal Fin Clamp 200 SR X
 1 x  HS1265 Hook & Loop Fastening Tape
 1 x  KBDD5251 KBDD Extreme Edition 130X Tail Blade Neon Yellow
 1 x  RH25E03XT T-REX 250 PLUS DFC BTF
 1 x  H7NB012XXW 700N DFC Engine Mount
 1 x  GFF-5000B Gryphon High performance Fuel System Filter Blue
 1 x  JRH61841 JR Tail Drive Belt MXL498 450
 1 x  PV1672 Landing Skid Set E700
 1 x  213207 Main Blade Linkage Rod (2x31mm)x2(2x23.5mm)x3
 1 x  SPMSH2026L 2.1-Gram Performance Nano CP X
 1 x  MCPX001BLEU -Metal Blade Grip w/ angular-contact bearings -Blue (MCPX)
 1 x  HC437-S ABEC-5 Thrust bearing 08 x 014 x 4 x (2pcs)
 1 x  BLH3429 Tail Boom Clamp 180 CFX
 1 x  H125932-03 - Socket Head Bolt M3 x 50 ( x5 )
 1 x  LX0864 Lynx Heli Swashplate Pro Replica Edition Red Devil MCPX-BL
 1 x  Q-B-0016 Quantum Parallel Charge Board for TP and T-Plug
 1 x  Q-C-0016 Quantum Φ2.0 mm Gold Plated Bullet Connectors
 1 x  29081720 Carburetter Retainer 61B Carb OS 91 HZ
 1 x  S0025001 MKS HV93 High Voltage Micro Servo
 1 x  REVOBAG2 - REVOLECTRIX CellPro Carry Case
 1 x  PV0213 Socket Screw M3x12
 1 x  TXD07-S TREX 600 High Pressure Cooling Fan
 1 x  O0003035-3 MKS Servo Metal Gears No. 6 and No. 7 For DS95i
 1 x  213650 Fin and Tail(CF)
 1 x  HC434-S - Thrust bearing Ø4 x Ø9 x 4 - Goblin 500/630/700/770 (2pcs)
 1 x  H0149-S Carbon Fibre Battery Tray
 1 x  H45B006XXW 450L Motor Mount 450L Motor Mount
 1 x  LX1122 - GOBLIN 570 - Low Profile Landing Gear - Black - Carbon Skid
 1 x  JRH61848 JR Tail Center Hub 450
 1 x  HC154-S DIN 12.9 Cup Point Set Screws M4x15 (5pcs)
 1 x  H0362-S Carbon Fiber 2mm Main Frame (1pc)
 1 x  SCG-700-13 Canopy Canomod Alexandros (Goblin 700)
 1 x  HQ0683A 68 Tail Blade
 1 x  106221 - Hudy Bearing Grease (Extra)
 1 x  Q-C-0009 Quantum Micro T plug Connector Male and Female
 1 x  FUC-T150-C01 Fusuno Monster composite canopy Trex 150 DFC
 1 x  TPA03400XX Clutch Shaft Set

Sub-total: 920,82€
IVA23%: 211,79€
Total: 1.132,61€
 
Localização
 
Marcas
 
Legendas de stock

Bom stock

Baixo stock

Sem stock

 
Newsletter
Subscreva a nossa newsletter para receber as informações e novidades da nossa loja.

Insira o seu email:

Adicionar


Para remover cique aqui

 

HBP22503 3S1P 11.1V 2250mAh/50C

HBP22503  3S1P 11.1V 2250mAh/50C
As imagens são meramente ilustrativas e sem valor contratual
Clique para ampliar
Preço41,14€
Disponibilidade: Existente
Referencia: HBP22503
Fabricante: ALIGN
Qtd:  Adicionar ao carrinho

HBP22503  3S1P 11.1V 2250mAh/50C

Instruction: Specification:
●These high discharge lithium polymer batteries are designed to maintain performance in series configuration, and can be charged individually through balancing plug. The extreme high capacity are catered specifically for applications requiring longest flight duration.
●Max Continuous Discharge: 50C. Normal operating temperature is approx. 40-65°C(within 80% of rated discharge). Max. temperature: 80°C.
●Recommend to discharge the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high current, high temperature and over-discharge)

NOTE:
When using high energy Li-poly Battery, please do not over-discharge,over-charge batteries, or result over-high temperature. Discharging capacity can't exceed 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.4V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.

Do not leave the charger is operating unattended as it may cause a fire.
●Output:11.1V 2250mAh 25Wh (3S1P)
●Dimension:106x33x21.8mm
●Weight:173g(Not including connectors)
●Max Continuous Discharge:50C
●Using 14AWG wire,thermal resistance:200°C, max continuous current 70A.
●Support 5C charging (Charging error could result in battery explosion, fire, and other unexpected danger or property loss. Please always charge batteries with equipment in sight, do not leave charger unattended. Should you need to leave the charging area, please remove the battery and abort charging process.)

Não há imagens adicionais para este artigo.