Carrinho
 1 x  Q-LP-0026 - DC(5.5*2.5mm) to Deans male 22AWG Silicone Wire 150mm
 1 x  MCPX006 - Xtreme Productions Carbon Tail Boom 2pcs (125mm, MCPX)
 1 x  Q-HS-0002 - Heat Shrink Tubing 4.0mm 1mtr red and black
 1 x  TPA41700 Tail Spindle
 1 x  PS-TL2751 - 450 Metal Tail Boom Support Brace
 1 x  TPA05806 TSA Model Motor Pinion Gear (13T)
 1 x  23818190 Carburettor Sealing Washer 55HZ
 1 x  Q-C-0043 - 3.5mm gold plated connector with red housing
 1 x  B130X06 Xtreme Productions Double Bearing Alu Tail Pitch Slider 130X
 1 x  41621100 - O.S. Needle Adj Screw
 1 x  EC3 Q-B-0012 Quantum Parallel Charge Board for XH and
 1 x  Q-C-0060 Quantum EC5 Battery Parallel Harness 10Awg Wire L=100MM
 1 x  Q-HS-0006 - Heat Shrink Tubing 8.0mm 1m Red 1M Black
 1 x  EDN-1211-8BLU -Swashplate leveler (8mm) - T-rex 500 (BLUE)
 1 x  Q-C-0022 Quantum Φ6.0 mm Gold Plated Bullet Connectors Easy Solder
 1 x  B130X02-R Xtreme Productions Titanium Rotor Hub (Red) Blade 130X
 1 x  TPA40200XX Boom Support Brace Set
 1 x  B130X24 Xtreme Productions Motor Mount Reinforced Plate 1.0 mm Blade 130X
 1 x  Q-C-0011 Quantum Deans Style T plug Connector - Male and Female
 1 x  Q-B-0037 Quantum 7.4V PH 2S 130X Balance Adaptor
 1 x  H0364-S Canomod Airbrush Canopy Yellow/Orange
 1 x  T4895-K10 Raptor 90 G4.1 Nitro FBL Kit
 1 x  PV1395 - Main Gear 135T (X50E)
 1 x  PV1501-R Thunder Tiger FRP Canopy (Red) (Raptor G4)
 1 x  Q-C-0015 Quantum XT60 Connectors 5 Pairs
 1 x  PV1539 Thunder Tiger Front Tail Gear (26T) G4N G4E
 1 x  PV0203 -Starter shaft bearings 6x15x5mm 2 pcs
 1 x  GSB-1010P Gryphon Pin-Flag Switch
 1 x  PV1644 Metal Swashplate
 1 x  OSKG020 Magic Mirror Helicopter Optical Tachometer
 1 x  TB-9814 Long Parts Box
 1 x  PS00-02 - OMI Fuel Magnet 3 replacement fuel magnets (3p)
 1 x  HC416-S ABEC-5 Flanged bearing 07x 011 x 3 (2pcs)
 1 x  PS892675 Power Epoxy 5min 12Gr
 1 x  PV1635 FBL Main Rotor Hub E700
 1 x  Q-C-0023 Quantum Φ8.0 mm Gold Plated Bullet Connectors Easy Solder
 1 x  25804170 Cover Gasket 55HZ
 1 x  Q-B-0014 Quantum Parallel Charge Board for XH and XT60
 1 x  B130X15-Y Xtreme Productions Tough Main Blade (Yellow) 130X
 1 x  Q-HS-0010 Quantum Servo Braid 1m with 240mm Blk/Orange heat shrink OD7mm
 1 x  PV1336 Thunder Tiger Linkage Rod Set (11)
 1 x  PV1550 Thunder Tiger Tail Rod Guide Plate G4N G4E
 1 x  PV0268 Thunder Tiger Red Loctite #262
 1 x  PV1536 - Tail Boom Bracket G4 E-N
 1 x  PV1614 Thunder Tiger Cap Head Screw Set G4N G4E
 1 x  PV6049 Metal FBL Control Lever V2 E700
 1 x  Q-HS-0012 Quantum Servo Braid 1m with 240mm Blk/Orange heat shrink OD7mm
 1 x  22681953 Fuel Inlet Nipple OS 55-50
 1 x  PV1332 Thunder Tiger Throttle Servo Tray
 1 x  Q-EXT-0009 Quantum Futaba Straight Extension wire 26AWG 300mm
 1 x  EA-079 Xtreme Productions Conversion Cable for Nano CPX to use MCPX
 1 x  TB - 9812 - Medium Parts Box
 1 x  PV1415 Metal Tail Support Bracket
 1 x  LX0340 NANO CPX Head Center Hub Silver with Lynx Carbon Main Shaft Combo
 1 x  FUP-GO701R Canopy Cover - Goblin 700 - Red
 1 x  MSH41022 Head rods set
 1 x  P-FLAC006 - Moulded Zip Transmitter Case
 1 x  LX0314 GOBLIN 630 - 5 To 4 Main Blade Set Adapter
 1 x  PV1532 Thunder Tiger Main Shaft Locking Ring G4N G4E
 1 x  HC079-S DIN 12.9 Shoulder Socket Head Cap Screw M3 x 18 (2pcs)

Sub-total: 1.645,52€
IVA23%: 378,47€
Total: 2.023,99€
 
Localização
 
Marcas
 
Legendas de stock

Bom stock

Baixo stock

Sem stock

 
Newsletter
Subscreva a nossa newsletter para receber as informações e novidades da nossa loja.

Insira o seu email:

Adicionar


Para remover cique aqui

 

B130X12 Xtreme Productions Carbon Tail Boom Supports (Black) Blade130X

 B130X12  Xtreme Productions Carbon Tail Boom Supports (Black) Blade130X
As imagens são meramente ilustrativas e sem valor contratual
Clique para ampliar
Preço5,00€
Disponibilidade: Existente
Referencia: B130X12
Fabricante: XTREME
EAN: b130x12
b130x12
Qtd:  Adicionar ao carrinho

 B130X12  Xtreme Productions Carbon Tail Boom Supports (Black) Blade130X

Não há imagens adicionais para este artigo.